 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 5V/3.3V HIGH-SPEED DIFFERENTIAL RECEIVER SY10EP16V FINAL FEATURES s s s s s s s 3.3V and 5V power supply options Bandwidth -3dB >2.5GHz Internal 75k input pulldown resistor Faster version of SY10EL16V 10K ECL compatible I/O Improved output waveform characteristics Available in 8-pin (3mm) MSOP and SOIC packages DESCRIPTION The SY10EP16V is a high-speed differential receiver. The device is functionally equivalent to the EL16V devices, with higher performance capabilities. With output transition times significantly faster than the EL16V, the SY10EP16V is ideally suited for interfacing with highfrequency sources. The SY10EP16V provides a V BB output for either single-ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the SY10EP16V as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01F capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW. PIN CONFIGURATION/BLOCK DIAGRAM PIN NAMES Pin Function ECL Data Inputs ECL Data Outputs Reference Voltage Output Positive Power Supply Negative Power Supply NC 1 D2 /D 3 VBB 4 8 VCC 7Q 6 /Q 5 VEE D, /D Q, /Q VBB VCC VEE Available in 8-Pin SOIC and MSOP Packages Rev.: A Amendment: /1 1 Issue Date: December 2000 Micrel SY10EP16V ABSOLUTE MAXIMUM RATINGS(1) Symbol VEE VCC VI IOUT IBB TA Tstore Rating Power Supply Voltage (VCC = 0) Power Supply Voltage (VEE = 0) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more negative than VCC) Output Current VBB Sink/Source Current(2) Operating Temperature Range Storage Temperature Range -Continuous -Surge 0.5 Value -6.0 to 0 +6.0 to 0 -6.0 to 0 +6.0 to 0 50 100 mA -40 to +85 -65 to +150 C C Unit Vdc Vdc Vdc Vdc mA NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V, VEE = 0V(5) TA = -40C Symbol IEE VOH VOL VIH VIL VBB VIHCMR IIH IIL Parameter Power Supply Current(2) Output HIGH Voltage(3) Voltage(3) Min. -- Max. 42 Min. -- TA = +25C Typ. -- -- -- -- -- -- -- -- -- Max. 42 TA = +85C Min. -- Max. 42 Unit mA mV mV mV mV mV V A A VCC -1080 VCC -0890 VCC -0980 VCC -1950 VCC -1650 VCC -1950 VCC -1230 VCC -0890 VCC -1130 VCC -1950 VCC -1500 VCC -1950 VCC -1430 VCC -1300 VCC -1350 VEE +2.0 -- 0.5 VCC -4.0 150 -- VEE +2.0 -- 0.5 VCC -0810 VCC -0910 VCC -0720 VCC -1630 VCC -1950 VCC -1595 VCC -0810 VCC -1060 VCC -0720 VCC -1480 VCC -1950 VCC -1445 VCC -1250 VCC -1310 VCC -1190 VCC -4.0 150 -- VEE +2.0 -- 0.5 VCC -4.0 150 -- Outuput LOW Input HIGH Voltage Input LOW Voltage Output Reference Voltage Input HIGH Voltage Common Mode Range(4) Input HIGH Current Input LOW Current NOTES: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. VCC = 0V, VEE = VEE(Min.) to VEE(Max.), all other pins floating. 3. All loading with 50 to VCC - 2.0V. 4. VIHCMR(Min.) varies 1:1 with VEE, Max. varies 1:1 with VCC. 5. Input and output parameters vary 1:1 with VCC. 2 Micrel SY10EP16V AC ELECTRICAL CHARACTERISTICS VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V, VEE = 0V TA = -40C Symbol fMAX tPLH tPHL tSKEW tr tf Parameter Maximum Toggle Frequency(1) Propagation Delay to Output Differential(2) Device Skew Output Rise/Fall Times (20% to 80%) Q D Q, /Q Min. -- 100 -- 60 Max. -- 300 -- 180 Min. -- 150 -- 60 TA = +25C Typ. 3 200 5.0 110 Max. -- 250 20 180 TA = +85C Min. -- 200 -- 70 Max. -- 300 20 180 Unit GHz ps ps ps NOTES: 1. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 2. VIN = 800mV PRODUCT ORDERING INFORMATION Ordering Code SY10EP16VZC SY10EP16VZCTR SY10EP16VKC SY10EP16VKCTR Package Type Z8-1 Z8-1 K8-1 K8-1 Operating Range Commercial Commercial Commercial Commercial Package Marking HP16 HP16 HEP16 HEP16 3 Micrel SY10EP16V 8 LEAD MSOP (K8-1) Rev. 01 4 Micrel SY10EP16V 8 LEAD PLASTIC SOIC (Z8-1) Rev. 03 MICREL-SYNERGY TEL 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 + 1 (408) 914-7878 WEB USA + 1 (408) 980-9191 FAX http://www.synergysemi.com http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. (c) 2000 Micrel Incorporated 5 |
Price & Availability of SY10EP16V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |